QS30
A compact 2.0 desktop speaker pair with two 2-inch full-range drivers, USB-A power and audio, and Bluetooth 5.4. It adds a programmable light display on the front baffle and a built-in microphone, and suits computer desks and calls.
- 5 W RMS total (2.5 W + 2.5 W)
- Dual 2-inch full-range drivers with bass reflex ports
- Bluetooth 5.4 and USB-A audio input
- 7 preset light effects plus app customisation
- Built-in MEMS microphone with noise cancellation
- Sound presets for music, movies and gaming
Fotos
8Anzeigen
Noch keine Anzeigen für dieses Modell
Wenn jemand ein QS30 verkauft, erscheinen hier die Anzeigen und der Verkaufsverlauf.
So eins verkaufenBeschreibung
The QS30 is a small stereo desktop speaker with two 2-inch full-range drivers rated at 2.5 W RMS each. Each driver sits in its own acoustic cavity, and two symmetric bass reflex channels extend the low end. Silicone foot-pads tilt the baffle slightly upward, so sound is aimed toward ear level when the unit sits below a monitor.
The front baffle carries a lighting display. Seven preset light effects can be cycled with a button on the top panel, and the mobile and computer apps allow custom effects. A MEMS microphone in the baffle uses noise cancellation to keep voices clear on calls. Three sound presets for music, movies and gaming are chosen in the app, and playback is controlled with the top-mounted buttons.
The speaker connects by an attached USB cable that carries both power and audio from a computer, or wirelessly over Bluetooth 5.4 using the SBC codec. The EDIFIER ConneX mobile app and EDIFIER TempoHub computer app handle sound and light settings and give access to the manual.
Video
Technische Daten
- Marke
- Edifier
- Modell
- QS30
- Kategorie
- Studio › Studiomonitore
Audio
- Total output power (RMS)
- 2.5W + 2.5W
- Driver
- 2-inch (52mm) full-range
- Frequency response
- 90Hz-18kHz
- Signal-to-noise ratio
- ≥ 85dB(A)
- Sound effects
- 3 presets (music, movie, gaming)
Inputs
- Audio inputs
- Bluetooth, USB-A
- Input sensitivity (Bluetooth)
- 800±50mFFS
- Input sensitivity (USB-A)
- 800±50mFFS
- Built-in microphone
- MEMS, with noise cancellation
Connectivity
- Bluetooth version
- V5.4
- Codecs
- SBC
- USB cable
- Attached, carries power and audio
Lighting and control
- Light effects
- 7 presets, customisable via app
- Controls
- Top-mounted buttons
- Apps
- EDIFIER ConneX (mobile), EDIFIER TempoHub (computer)
Physical
- Dimensions (W x H x D)
- 428.7mm x 77.2mm x 89mm
- Net weight
- 1.18kg