Ecler HUB1408
Rack-mounted digital zone manager with 14 inputs, 8 analogue outputs and built-in DSP, aimed at installations in retail, hospitality, education and similar venues. It is configured through an embedded web application and can be controlled from wall panels, paging consoles or a mobile app.
- 14 inputs, 8 outputs digital zone manager with DSP
- 4 mic/line inputs with switchable +48 V phantom power
- Hangar embedded web app, Ecler pilot app, TP-NET control
- Up to 8 eMCONTROL1 panels and 2 eMPAGE paging consoles
- 2RU 19" rack, 3.60 kg, 20 W consumption
Fotos
5Anzeigen
Noch keine Anzeigen für dieses Modell
Wenn jemand ein Ecler HUB1408 verkauft, erscheinen hier die Anzeigen und der Verkaufsverlauf.
So eins verkaufenBeschreibung
The unit routes 14 inputs (2 line, 4 mic/line and 8 remote-bus inputs) to 8 balanced line outputs. Each output zone can select its source, with volume, mute and three-band tone control. Four priority levels and ducker/pager functions let announcements override background audio. DSP includes frequency shifter, stereo link, delay, crossover filters, an 8-band graphic EQ and a compressor/limiter, and predefined setups allow a quick plug-and-play installation.
Configuration is done with the embedded Hangar web application from a standard browser. Day-to-day control is available from the front panel, up to 8 eMCONTROL1 wall panels, up to 2 eMPAGE paging consoles, the Ecler pilot app for Android and iOS, or third-party systems through the TP-NET protocol. A dry-contact MUTE port can silence programmed outputs.
Connections include a 10/100 Ethernet port, an RS-232 serial port on DB9, an RS485 remote bus, a 3.5 mm headphone monitor output selectable from outputs 1 to 8, and a 12 V DC auxiliary supply. The unit is a 2RU 19-inch rack device powered from the mains through an IEC C14 inlet.
Technische Daten
- Marke
- Ecler
- Modell
- HUB1408
- Kategorie
- Live-Sound › PA-Lautsprecher
Audio
- Processor
- Floating point 32/64bit
- Sampling rate
- 48 kHz
- Resolution
- 24 bit, AKM
- Latency
- <1.5 ms
- Frequency response
- <10Hz ~ 20kHz (+0dB / -0.5dB)
- Dynamic range
- AD:111dB, DA: 115dB
- THD + Noise
- < 0.005% (1kHz, 1Vrms)
Inputs
- Input ports
- 2 (IN1-2) Line; 4 (IN3-6) Mic/Line; 8 (IN7-14) Remote
- Input connectors
- Line: RCA female with Euroblock stack, unbalanced; Mic/Line: Euroblock, balanced; Remote: RJ45, balanced
- Input sensitivity
- Line: +5 / -15dBV; Mic/Line: +0 / -50dBV; Remote: 0dBV
- Input impedance
- Line: >13kΩ; Mic/Line: >24kΩ; Remote: >24kΩ
- Max input level
- 12dBV
- CMRR
- >60dB (20Hz - 20kHz)
- Phantom power
- Mic/Line: +48VDC (rear panel switch)
Outputs
- Output ports
- 8, Line
- Output connectors
- Euroblock, 3-pin, balanced
- Max output level
- 12dbV
- Crosstalk
- >90dB, 20Hz - 20kHz
- Headphones
- From Out1 to Out8 selectable, Mini-Jack 3,5mm (>200mW – 200Ω)
Connectivity
- Ethernet
- 1, RJ-45, 10/100Mb Auto X-Over CAT5 up to 100m
- Serial port
- RS-232 interface with DB9 connector
- Remote control bus
- Remote bus, RS485
- GPIs
- 1, MUTE port
- Programming and control
- Hangar (embedded web application), Ecler pilot (Android/iOS), TPNET (UDP/RS232)
Power
- AC mains requirement
- 100-240 VAC @ 50-60Hz
- AC mains connector
- C14 IEC connector
- Power consumption
- 20W
- Secondary power supply
- +12VDC, 0,6A max. (short circuit protected)
Physical
- Installation
- 19" rack format (2RU)
- Dimensions (WxHxD)
- 482.6 x 88.0 x 200.0 mm / 19.0 x 3.5 x 7.9 in.
- Weight
- 3.60 kg / 7.93 lb
- Operating temperature
- Min: -10°C ; 14°F, Max: 40°C ; 104°F
- Operating humidity
- <85% HR
- Shipping dimensions (WxHxD)
- 550 x 120 x 390 mm / 21.65 x 4.72 x 15.35 in.
- Shipping weight
- 5.6 kg / 12.35 lb
Software
- Optional accessories
- eMCONTROL1 wall panels, eMPAGE paging stations, WPaMIX-T