D1· Verstärker
Compact aluminium USB-C and optical DAC with a headphone amplifier, built for desktop use with computers, TVs and media players. It feeds headphones and powered speakers or AV receivers and takes its power from the USB connection.
- 32-bit DAC based on the ESS9018 converter
- USB-C and optical (TOSLINK/SPDIF) digital inputs
- Stereo RCA outputs plus front headphone output
- Powered over USB, no external power supply
- Plug and play on macOS, Windows and iOS, no drivers
- Suited to headphones from 20 to 300 ohms
Fotos
5Anzeigen
Noch keine Anzeigen für dieses Modell
Wenn jemand ein D1 verkauft, erscheinen hier die Anzeigen und der Verkaufsverlauf.
So eins verkaufenBeschreibung
The D1 is an external 32-bit DAC and headphone amplifier meant to replace a computer's built-in sound card. It takes digital audio over USB-C or optical (TOSLINK/SPDIF), converts it with an ESS9018 chip and sends it to a front headphone output and a pair of stereo RCA outputs for powered speakers or an AV receiver.
The headphone stage is based on an ES9601C SABRE low-noise op-amp. The maker suggests headphones between 20 and 300 ohms as the best match, and reports that some users run 600 ohm models. A front volume control sets the level, and volume can also be adjusted from the computer. Optical input is a fixed output, so a TV remote cannot change the level. The case is aluminium and the RCA connectors are audiophile-grade.
The unit is powered over USB, so no external supply is needed. It works with macOS, Windows and iOS without drivers or apps; on a Mac the D1 is selected in the Sound settings. Android 5.0 or later can be used through a USB OTG cable. A USB cable is included.
Video
Technische Daten
- Marke
- Audioengine
- Modell
- D1
- Kategorie
- Hi-Fi und Heimaudio › Verstärker
Inputs
- Inputs
- USB C/Optical (SPDIF)
- USB input
- USB C
- Optical input
- Optical / TOSLINK
Outputs
- Outputs
- RCA stereo/3.5mm headphone
- Stereo output
- RCA
- Headphone output
- 3.5mm
- Volume control
- Yes
Audio
- DAC type
- Dual Mode USB C and Optical (SPDIF)
- D/A converter
- ESS9018
- Input bit depth
- 32-bit
- Headphone amplifier
- ES9601C SABRE low noise opamp
- Headphone impedance
- 10 ohms to 600 ohms
- Supported formats
- PCM, DSD
Connectivity
- Platform compatibility
- iOS, MacOS, Windows
- Drivers
- No special software, apps or drivers required
Power
- Power source
- USB bus (computer or any USB port)
Physical
- Case
- Aluminum
- Portability
- Desktop
In the box
- Amplifier and DAC
- 1 x D1
- USB cable
- 1
- Microfiber product bag
- 1
- Setup guide
- 1