Vestlyd M6C Active – Coaxial Power Monitors That Need Nothing Else

The Vestlyd M6C Active takes the 1970s power-monitor idea and rebuilds it with four independent Class D amplifiers inside the cabinet. There is no receiver to buy, no amp to match, no rack to fill: you plug a source into the rear panel and the pair plays.

Key Features

• 4 x 75 W of Class D power: One PWM Class D amplifier channel per driver, not two amps split across the pair, for tighter control and headroom that holds up when you push it.
• 6.5-inch coaxial Power Monitor design: The 1-inch titanium dome compression tweeter sits inside the paper woofer motor, so both drivers reach you time-aligned from a single point.
• Bass down to 43 Hz: Dual front ports and a sealed-in amplifier let a compact cabinet reach low without a subwoofer.
• HDMI eARC for the TV: One cable to the television, with automatic power-up on every input except Bluetooth and phono.
• Bluetooth 5.1 with aptX HD, aptX Low Latency and AAC: Up to 24-bit/192 kHz resolution over wireless.
• Pro and analogue inputs: XLR/6.35 mm combo, RCA with switchable phono MM stage, optical digital and USB-C for a computer.
• Three voicings plus tone control: Music, film and neutral profiles, with left/right assignment and bass and treble trim on the rear buttons.
• Sub out and 35 mm pole socket: Add a subwoofer if you want more, or put the pair on stands or a pole.

Customer Benefits

An active pair removes the part of hi-fi that most people find tiring: matching an amplifier to a speaker, working out how much power is enough, running speaker cable across a room. The M6C Active arrives already matched to itself. A turntable goes straight into the phono input, a TV into HDMI eARC, a laptop into USB-C, a phone over Bluetooth, and the remote handles the rest from the sofa. Because each driver has its own amplifier, the sound stays clean at volumes where a small passive pair on a modest amp would already be flattening out.

Quick Specs

• System type: Active 2-way coaxial, bass reflex with dual front ports
• Amplification: 4 x 75 W, PWM-driven Class D
• Frequency range: 43 Hz - 24 kHz (-6 dB); 47.5 Hz - 22 kHz (-3 dB)
• Woofer: 6.5-inch paper cone
• Tweeter: 1-inch titanium dome, coaxial
• Wireless: Bluetooth 5.1, up to 24-bit/192 kHz, AAC / aptX HD / aptX Low Latency
• Inputs: HDMI eARC, XLR/6.35 mm combo, optical digital, USB-C, RCA line/phono MM
• Output: Sub out
• Cabinet: MDF
• Dimensions (H x W x D): 36.3 x 24.6 x 21.6 cm
• Weight: 16.49 kg per pair
• Standby power: Under 0.5 W
• Finishes: Black synthetic leather or Oak

In the Box

• 2 x Vestlyd M6C Active speakers
• Power cable (1.8 m)
• Speaker cable (3 m)
• USB-C cable (1.5 m)
• Remote control with AAA batteries
• Quick start guide

Use Cases / Ideal For

Living rooms and apartments where the system has to be two boxes and nothing more. Desk and near-field listening, where the coaxial driver keeps imaging stable up close. Vinyl setups that need a phono input without a separate preamp. Television and gaming through HDMI eARC. Small studio and home-office monitoring, using the neutral voicing.

Compatibility

• Turntables: Moving-magnet cartridges connect directly to the RCA input set to phono; moving-coil needs an external step-up.
• Televisions: Any TV with an HDMI ARC or eARC port.
• Computers: USB-C audio, plus optical for consoles and streamers.
• Stands: Vestlyd M-Stands, or any stand and 35 mm pole with a flat top plate.
• Subwoofers: Any powered subwoofer with a line-level input, via the sub out.

Pros & Cons

✅ Pros:

• Four discrete amplifier channels rather than the usual two
• Genuine 43 Hz bass from a compact cabinet
• Input list covers TV, turntable, computer and phone without extra boxes
• Coaxial driver gives a wide, forgiving sweet spot

⚠️ Cons:

• Mains power needed at both speakers, and a link cable between them
• No Wi-Fi streaming or multi-room app

The M6C Active is the smaller of the two Vestlyd Power Monitors, and the one to pick when the room is normal-sized and the wall behind the speakers is closer than you would like. Pair it with the Vestlyd Pro T1 turntable and a set of M-Stands and the whole system is three purchases deep.