MC X50
Moving-coil phono cartridge and the top model of Ortofon's MC X Series, with a nude Micro Ridge diamond stylus on a boron cantilever. Aimed at vinyl listeners who want a high-resolution MC cartridge with a half-inch mount.
- Top model of the Ortofon MC X Series
- Nude Micro Ridge diamond stylus, r/R 2.5/75 μm
- Boron cantilever
- High-purity silver coil wire
- MIM stainless steel body with honeycomb core
- 0.4 mV output, 2.0 g tracking force, 8.6 g weight
Fotos
8Anzeigen
Noch keine Anzeigen für dieses Modell
Wenn jemand ein MC X50 verkauft, erscheinen hier die Anzeigen und der Verkaufsverlauf.
So eins verkaufenBeschreibung
The MC X50 is the highest-ranked cartridge in the MC X Series. It pairs a nude Micro Ridge diamond stylus, which has a very narrow side radius, with a boron cantilever. This combination is intended to improve high-frequency tracking, lower inner-groove distortion, and give a quick transient response with low distortion.
Inside, the coils are wound with high-purity silver wire and work with a newly developed magnet system that has a one-piece pole cylinder built into a rear magnet yoke. The damping uses rubber compounds developed and produced in-house, and the X50 gets a new rubber suspension with a newly formulated compound made specifically for it. The body is MIM stainless steel with a honeycomb core structure, finished in black.
The cartridge uses a half-inch mount and weighs 8.6 g. Recommended tracking force is 2.0 g, and output voltage is 0.4 mV at 1 kHz, so it needs a phono stage with moving-coil input.
Video
Technische Daten
- Marke
- Ortofon
- Modell
- MC X50
- Kategorie
- DJ-Equipment › Tonabnehmer und Nadeln
Electrical
- Output voltage at 1 kHz, 5 cm/sec
- 0.4 mV
- Channel balance at 1 kHz
- 0.5 dB
- Channel separation at 1 kHz
- > 28 dB
- Internal impedance, DC resistance
- 6 Ω
- Frequency response 20 Hz - 20 kHz
- +/-1 dB
Stylus and Cantilever
- Stylus type
- Nude Micro Ridge diamond
- Stylus tip radius
- r/R 2.5/75 μm
- Cantilever material
- Boron
- Stylus suspensions
- Ortofon exclusive
- Compliance, dynamic, lateral
- 14 μm/mN
Coil System
- Coil system
- High-purity silver Coil wire
- Coil wire material
- High-purity silver
Setup
- Tracking force, recommended
- 2.0 grams
- Mounting type
- Half inch mount
Physical
- Cartridge body material
- MIM Stainless Steel & Honeycomb Core Structure
- Cartridge colour
- Black
- Cartridge weight
- 8.6 grams