OLLO Audio R1· Kopfhörer
Closed-back over-ear recording headphones with U-shaped tuning, 50 mm dynamic drivers and a 32 ohm impedance, meant for tracking vocals, instruments, field recordings and podcasts. Walnut cups, a stainless steel headband and user-serviceable parts.
- Closed-back, over-ear, U-shaped tuning for tracking
- 50 mm dynamic neodymium drivers, ~32 ohm
- About 10 dBSPL isolation, perceived as half the volume
- Detachable 2 m dual mini XLR cable, 3.5 mm plus 6.3 mm adapter
- Walnut cups; parts replaceable with home tools; 5-year warranty
Fotos
8Anzeigen
Noch keine Anzeigen für dieses Modell
Wenn jemand ein OLLO Audio R1 verkauft, erscheinen hier die Anzeigen und der Verkaufsverlauf.
So eins verkaufenBeschreibung
The R1 is a closed-back, circumaural headphone built for monitoring while recording. Its isolation lowers outside sound and the bleed reaching a microphone by about 10 dBSPL, which is perceived as roughly half the volume. The tuning is U-shaped, with emphasised bass and treble, so performers can feel the groove during a take. It is not intended as a flat mixing reference; the maker points to its X1 open-back model for that.
The drivers are 50 mm dynamic neodymium units with a composite PU+PET membrane, matched left to right within +/-1 dB. At about 32 ohms and 110 dBSPL sensitivity they are designed to play loudly from phones and interfaces alike. The cups are American walnut and the headband is stainless steel with silicone and a self-adjusting artificial leather strap. The cups rotate and tilt, and the earpads change without tools. Drivers, pads, headband, strap and cable can all be replaced with home tools.
The 2 m detachable silicone Y-cable ends in dual mini XLR connectors at the cups and a 3.5 mm jack, with a screw-on adapter to 6.3 mm. Aftermarket mini XLR cables are compatible. A balanced cable is not offered by the maker.
Video
Technische Daten
- Marke
- OLLO Audio
- Modell
- R1
- Kategorie
- Kopfhörer
Audio
- Style
- Closed back, Over the ear
- Frequency range
- 5 Hz - 22 kHz sweep 1/3 oct p-p range 13.4 dBSPL +/- 1dB
- SPL/sensitivity
- 110 dBSPL @ 1kHz RMS3dB @ 0 dBu
- Impedance
- ~32 ohm
- Speaker type and size
- Dynamic, 50mm
- Magnet type
- Neodymium
- Membrane
- Composite Pu+PET patented pattern
- THD & 2nd
- <0.12% & <0.05% @ 94 dB SPL @ 1kHz
- Average isolation, full range
- ~10dBSPL(c); perceived as cut by half
- Driver matching
- +/-1dB SPL tolerance, 100Hz-10kHz
Connectivity
- Cable termination
- Detachable 2 meters long Y mini XLR
- Connector
- 3.5mm jack with an adapter to 6.3mm jack
- Cable
- Silicone, enameled OFC core, dual mini XLR for L and R
Physical
- Ear pads diameter in/out
- 60mm/100mm
- Ear pads depth
- 25mm (0.8in), +/-2.5mm
- Ear pads material
- Acoustic foam with artificial leather
- Ear cups material
- American walnut
- Headband material
- Stainless steel and silicone
- Weight ex. cable
- 386 g (0.8 lb)
- Product classification
- EN60268-7-IEC-DCSC-32R2, Circumaural closed back dynamic headphones
Software
- Calibration
- Unit Specific Calibration not available
Warranty
- International warranty
- 5-year limited warranty
- Trial period - Money back
- 90 days from delivery date when purchased directly from OLLO Audio