VIDA-24Q
The VIDA-24Q is a 4-channel Class D installation amplifier rated at 2400 W total, with outputs that can each be set to low-impedance or 70/100 V. It adds Dante/AES67 networking, DSP, a microSD player and web-based setup, and suits fixed installs such as hospitality, retail, education and fitness venues.
- 4 channels, 2400 W total with VersaPower asymmetric allocation
- Per-channel Lo-Z (2/4/8 Ω) or Hi-Z (70/100 V) output mode
- 4 analogue inputs plus 4 Dante/AES67 Rx and 4 Tx channels
- Built-in microSD player and signal generator
- Embedded web app with matrix, DSP, events and user panels
- Sleep mode draws 4.1 W at 230 VAC
Fotos
6Anzeigen
Noch keine Anzeigen für dieses Modell
Wenn jemand ein VIDA-24Q verkauft, erscheinen hier die Anzeigen und der Verkaufsverlauf.
So eins verkaufenBeschreibung
The VIDA-24Q is a four-channel Class D amplifier for fixed installations. Each output can be set for low-impedance (2, 4 or 8 ohm) or high-impedance (70 V or 100 V) operation. Its VersaPower scheme shares the 2400 W budget unevenly between channels, so a single output can draw far more than an equal quarter of the total. A Smart VersaPower tool in the setup software assists with this allocation.
Audio comes from four balanced analogue inputs, four Dante/AES67 network channels, a built-in player that reads files from a microSD card, and a signal generator. The unit has two auxiliary line outputs and four Dante/AES67 digital outputs. A 4-in by 6-out matrix, input processing (noise gate, high-pass filter, frequency shifter, compressor/limiter) and output processing (delay, parametric and graphic EQ, limiters) are all handled by the on-board DSP. Auto standby per channel and a sleep mode keep idle consumption low.
The amplifier is configured through an embedded web application, which also covers priority and backup signals, GPIO events, calendar events and playlists. Custom user panels can be used from iOS, Android or a browser, and the unit works with the EclerCLOUD monitoring platform. It connects over gigabit Ethernet and fits a 19-inch rack or sits on a desktop.
Video
Technische Daten
- Marke
- Ecler
- Modell
- VIDA-24Q
- Kategorie
- Live-Sound › Verstärker
Channels
- Output channels
- 4
- Input channels
- 4 analogue, 4 Dante/AES67 Rx, 1 embedded player, 1 embedded signal generator
- Digital matrix
- 4 in x 6 out
- Output configuration
- Lo-Z/Hi-Z, 70V/100V, 4Ω/8Ω/2Ω, selected per channel
Inputs
- Analogue input connector
- IN1-4: 3-pin Euroblock, balanced, pitch 3,5 mm
- Input sensitivity
- -6 to +6 dBV / 0,5 to 2 Vrms
- Input impedance
- >24kΩ
- Max input level
- +18 dBV / +20,2 dBu
Outputs
- Output connector
- 2-pin Euroblock, pitch 7,62 mm
- Auxiliary outputs
- 2, AUX1-2: 3-pin Euroblock, balanced
- Digital outputs
- 4, Ethernet via Dante/AES67 Controller
Audio
- Symmetrical power, all channels (8Ω/4Ω/2Ω/100V/70V)
- 600W per channel
- Asymmetrical power at 8Ω
- 1400W
- Asymmetrical power at 4Ω
- 2400W
- Asymmetrical power at 2Ω
- 1600W
- Asymmetrical power at 100V
- 2400W
- Asymmetrical power at 70V
- 2000W
- Voltage gain
- 28 to 40 dBV
- Frequency response
- 15Hz-25kHz
- THD + Noise
- < 0,1%
- SNR
- 95 dBA
- Damping factor
- >500
- Dynamic range
- 114 dB
- Sampling rate / resolution
- 48 kHz / 24 bit
- DSP latency
- 2,8 ms
Connectivity
- Ethernet
- Base-Tx 10/100/1000Mb Auto X-Over
- Dante protocol
- Dante/AES67 4x Tx / 4x Rx channels (2/2 flows)
- GPIs
- x4 GPIs (0-10V)
- GPOs
- x4 NC / NO contacts
- Programming and control
- Embedded web application
Storage
- Micro SD capacity
- Up to 2TB
- Playable audio files
- mp3, ogg, WAV, FLAC, AIFF
Power
- AC mains requirement
- 100-240 V @ 50-60Hz (±10%)
- AC mains connector
- IEC C14 inlet
- Power at idle (230VAC)
- 72 W
- Power in standby/sleep mode (230VAC)
- 4,1 W
- Efficiency
- 72%
- Amplification technology
- Class D
Physical
- Dimensions (WxHxD)
- 482.6 x 88 x 410 mm / 19 x 3.46 x 16.14 in.
- Weight
- 9.3 kg / 20.5 lb
- Installation options
- Rack 19" installation & desktop
- Operating temperature
- -10⁰C to 50⁰C / 14⁰F to 122⁰F
- Cooling
- Fan
In the box
- Included accessories
- Mains cords, Euroblock Connectors (inputs /outputs), Desktop feet, rack 19" installation hardware